Key Features
l Available in pressure ranges from 0.5 to 14 bar or 3 to 30 bar
l Programmable with up to 300 product and 300 test set parameters
l Multi-step sequences, allowing leak, opening and re-seat values to be tested
l Barcode reader support, allowing the recording of works order, batch and individual serial numbers
l Built in data-logging for easy documenting of test evidence
l 压力范围为0.5至14 bar或3至30 bar
l 可编程，最多300个产品和300个测试装置参数
l 多步骤序列，允许测试泄漏，打开和重新安装值
l 条形码阅读器支持，允许记录工单，批量和单个序列号
l 内置数据记录功能，便于记录测试证据
The FCO750 with custom firmware for pressure relief valve testing provides a comprehensive system for testing across a wide range of pressures, the full functionality of a valve. This can include leak testing at nominal pressure-“n%”, opening point by means of the Ramp test and re-seat point. Tolerances either side of the nominal pressure are derived from programmable limits set according to the application and these are applied to all three of the test phases.
带有用于减压阀测试的定制固件的FCO750提供了一个全面的系统，可在各种压力下进行测试，即阀门的全部功能。这可以包括在标称压力下的泄漏测试- “n％”，通过斜坡测试和重新安装点的开启点。公称压力任一侧的公差均来自根据应用设定的可编程极限，并且这些公差适用于所有三个测试阶段。
The Barcode input system allows the instrument to select appropriate programs direct from works orders or specific build sheets with the nominal working pressure extracted from the Barcode ID.
条形码输入系统允许仪器直接从工作订单或特定构建表中选择适当的程序，并从条形码ID中提取标称工作压力。
The test for leak integrity is typically carried out at the minimal valve pressure – a programmable tolerance to ensure the valve is closed and does not leak.
泄漏完整性测试通常在最小阀门压力下进行- 可编程公差以确保阀门关闭且不泄漏。
The test for nominal pressure can be either a single shot test for pre-set valves or a continuous test where the operator can adjust the tension to arrive at the nominal pressure which is then confirmed by the operator based on the displayed value.
标称压力的测试可以是针对预设阀门的单次测试，也可以是连续测试，其中操作员可以调节张力以达到标称压力，然后由操作员根据显示的值确认。
The test for –re-seat is again derived from the nominal value and uses the programmable limits to determine that the valve has re-closed with limits.
The flexible platform of the FCO750 allows multiple tests to be defined and this in turn provides the opportunity to optimise tests according to physical size and characteristics of individual valve designs and constructions.
re-seat的测试再次来自标称值，并使用可编程限制来确定阀门已经重新关闭并具有限制。
FCO750的灵活平台允许定义多个测试，这反过来又提供了根据各个阀门设计和结构的物理尺寸和特性优化测试的机会。
1
Low pressure transmitters with programmable ranges and engineering units, as well as multiple case and display options.
Furness Controls manufacture a range of pressure transmitters to suit most low pressure applications from dirty environments, power generation, steel, cement, brick, glass etc., to ultra clean environments for medical, pharmaceutical, nuclear and semi-conductor applications.
These can be wall mounted, pipe mounted, panel mounted and ATEX approved.
低压变送器，带可编程范围和工程单位，以及多种外壳和显示选项。
Furness Controls生产一系列压力变送器，适用于从肮脏环境，发电，钢铁，水泥，砖，玻璃等大多数低压应用，到医疗，制药，核和半导体应用的超洁净环境。
这些可以是壁挂式，管道式，面板式和ATEX认证
